Need help?Do you have a question about the Makita LS1016 and is the answer not in the manual?
General| No Load Speed | 3, 200 RPM |
|---|---|
| Input Wattage | 1, 650 W |
| Blade Diameter | 10 inches |
| Arbor Size | 5/8 inches |
| Amperage | 15.0 A |
| Miter Range | 52° left, 60° right |
Identifies the specific model numbers for the saw.
Specifies the diameter of the saw blade.
Indicates the thickness of the saw blade body.
Specifies the diameter of the blade's center hole.
Details maximum cutting dimensions based on miter and bevel angles.
Lists special maximum cutting capacities, like crown molding.
Indicates the rotational speed of the blade when not cutting.
Specifies the type of laser used on specific models.
Provides the overall dimensions of the saw.
States the weight of the saw.
Indicates the safety class rating of the equipment.
Explains the meaning of symbols used on the equipment.
Indicates the tool has double insulation for safety.
Details the requirements for connecting the saw to a power source.
Provides noise level information for the saw.
Safety advice to wear ear protection during operation.
Specifies vibration emission data for the saw.
Guidelines for maintaining a safe work environment.
Crucial safety instructions related to electrical connections and usage.
Essential personal safety measures during operation.
Guidelines for proper usage and maintenance of the power tool.
Information regarding tool servicing and repairs.
Warning to keep hands away from the blade.
Pre-operation check of the saw blade's condition.
Mandatory use of eye protection.
Importance of connecting to dust collection.
Warning against operating without guards.
Importance of tool stability.
Safety instruction to avoid reaching around the blade.
Warning against use near flammable substances.
Proper handle grip and awareness of movement.
Details the function and importance of the blade guard.
Steps involved in setting up and installing the saw.
Procedure for securely mounting the saw to a workbench.
Notice regarding kerf board adjustment after bevel angle changes.
Information on how to maintain the saw's maximum cutting capacity.
Caution to secure the turn base after miter angle adjustment.
Notice regarding raising the handle during turn base operation.
Specific switch operation for European models.
General switch operation for non-European models.
Specifies models that have work lights.
Explanation of the constant speed control feature.
Description of the soft start functionality.
Specifies models equipped with a laser.
Information on storing the tool and its accessories.
Details on storing the hex wrench.
Note on correct inner flange installation.
Guidance on blade mounting direction.
Details on storing the socket wrench.
Warning about using the correct arbor hole ring.
Note on using a vacuum cleaner for dust collection.
Warning on the importance of correct workpiece securing.
Warning to ensure fences are securely fastened.
Warning on securing the workpiece with the vise.
Notice to release the handle before operation.
Warning to check blade contact before starting.
Warning on securing the carriage during operation.
Guidance on measuring workpieces for accurate cuts.
Warning against cutting thick or round aluminum.
Warning against using wider blades for groove cuts.
Warning to unplug before maintenance.
Importance of blade sharpness and cleanliness.
Steps to adjust the miter angle of the saw.
Steps to adjust the bevel angle of the saw.
Steps to adjust the laser line position for accurate cuts.
Specifies models with laser lens cleaning.
Warning about recommended accessories.
Guidance on using accessories for their intended purpose.
To Next Page
