To Next PageTo Next Page
Need help?Do you have a question about the Makita M0901 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| No Load Speed | 11000 rpm |
| Wheel Diameter | 100 mm |
| Spindle Thread | M10 |
| Overall Length | 280 mm |
Safety precautions for maintaining a clean, well-lit, and safe work environment.
Guidelines for safe use of electrical connections and avoiding shock hazards.
Advice on staying alert, using PPE, and preventing unintentional starting.
Instructions for proper operation, maintenance, and storage of power tools.
Guidance on qualified repair, parts, and lubrication for maintaining the tool.
General safety guidelines applicable to all grinding operations with the tool.
Explains kickback and provides precautions to avoid it during operation.
Specific safety advice for grinding operations, including accessory use.
Further safety advice, including specific wheel types and workpiece handling.
Description and operation of the shaft lock for accessory changes.
How to operate the slide switch for starting, stopping, and locking the tool.
Instructions for securely attaching the side grip (handle) to the tool.
Steps for fitting and adjusting the wheel guard for user protection.
Procedure for mounting and removing grinding wheels and multi-discs.
Technique and safety tips for performing grinding operations effectively.
Instructions for performing routine inspection and maintenance on the tool.
Details of Makita's one-year limited warranty for the angle grinder.
