11 ENGLISH
COMBINATION OF APPLICATIONS AND ACCESSORIES
Optional accessory
CAUTION: Using the tool with incorrect guards can cause risks as follows.
• When using the tool with incorrect guards for stone material, there is an increased risk of exposure
to dust and loss of control resulting in kickback.
• When using a cut-o wheel guard for facial grinding, the wheel guard may interfere with the work-
piece causing poor control.
• When using a grinding wheel guard for cutting-o operations with bonded abrasive wheels and dia-
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
• Use of dust collecting wheel guards for cutting-o and facial operations in concrete or masonry
reduces a risk of exposure to dust.
• When using dual purpose (combined grinding and cutting-o abrasive) ange mounted wheels, only
use a cut-o wheel guard.
4
3
4
3
1
2
5
7
8
6
9
10
6
6
6
8
11
12
13
14
4
7
- Application 180 mm model 230 mm model
1 - Side grip
2 - Wheel guard (for grinding wheel)
3 - Inner ange
4 - Super ange
5 Grinding Depressed center wheel
6 - Lock nut
7 - Wheel guard (for cut-o wheel)
8 Cutting-o Abrasive cut-o wheel / Diamond wheel
9 Grinding / Cutting-o Dual purpose wheel -
10 - Inner ange 78 (Australia and New Zealand only) *1
11 - Outer ange 78 (Australia and New Zealand only) *1
12 - Side grip for dust collecting wheel guard *2
13 - Dust collecting wheel guard for cutting-o *2*3
14 Cutting-o Diamond wheel
- - Lock nut wrench
NOTE: *1 Use Inner ange 78 and Outer ange 78 together. (Australia and New Zealand only)