Need help?Do you have a question about the Makita TD110D and is the answer not in the manual?
General| Voltage | 10.8V |
|---|---|
| Max Torque | 110 Nm |
| No Load Speed | 0-2, 600 RPM |
| Impacts Per Minute | 0 - 3, 200 ipm |
| Battery Type | Li-ion |
| Driving Shank | 1/4" Hex |
| Machine Screw | M4-M8 |
| Standard Bolt | M5-M12 |
| High Strength Bolt | M5-M10 |
| Coarse thread screw (length) | 22-90 mm |
| Weight with battery | 1.2 kg |
| Length | 153 mm |
| Blows Per Minute | 0 - 3, 200 ipm |
To Next Page
