Need help?Do you have a question about the Makita TM3010C and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| Input Power | 320 W |
| Oscillation Angle | 3.2° |
| No Load Speed | 6, 000 - 20, 000 OPM |
| Vibration Level | 2.5 m/s² |
| Voltage | 230 V |
| Variable Speed Control | Yes |
| Cord Length | 2.5 m |
| Weight | 1.6 kg |
Shows symbols used for equipment and their meanings.
Describes the tool's purpose and applications for sawing, cutting, and sanding.
Details A-weighted noise levels for different work modes.
Lists vibration emission values for various work modes according to EN60745.
Guidelines for maintaining a safe and clean work environment.
Precautions related to power, cords, and grounding to prevent electric shock.
Explains how to operate the slide switch.
Details how to adjust the speed dial for optimal performance.
Describes the electronic speed control for consistent output.
Guides on fitting and removing accessories securely.
Instructions for performing cutting, sawing, and scraping tasks.
Guidance on proper sanding techniques and paper usage.
Details the installation and use of the dust extraction system.
To Next Page
