To Next PageTo Next PageWhy does my Makita UB001CZ motor stop running after a little use?
If the Makita Blower motor stops running after a short time, it could be due to a low battery charge. Try recharging the battery, and if that doesn't work, replace it. Another possible cause is overheating, in which case you should stop using the blower to allow it to cool down.
What to do if Makita UB001CZ Blower motor cannot stop?
If the Makita Blower motor cannot stop, remove the battery.
Why Makita UB001CZ Blower motor does not run?
If the Makita Blower's motor isn't running, first ensure the battery is correctly installed. If it still doesn't work, the battery might be the problem. Try recharging it, and if that doesn't help, replace the battery. If these steps don't resolve the issue, the drive system may not be working correctly.
What to do if Makita UB001CZ Blower does not reach maximum speed?
If your Makita Blower isn't reaching maximum speed, check if the battery is installed properly according to the manual. Also, the battery power might be dropping, so recharge or replace the battery. If the problem persists, the drive system may not be working correctly.
General
