What to do if Makita UD2500 motor does not start?
If the motor of your Makita Paper Shredder doesn't start, there are several potential causes. First, check the mains supply to ensure there is power. Also, verify the retaining basket is correctly locked. If overload protection is activated, wait for the machine to cool down, then press the green button. If the mains cable is defective, have it checked by an authorized service center.
Why does my Makita UD2500 start but get blocked by even slight load?
If your Makita Paper Shredder starts but is blocked by even a slight load, it could be due to the extension cable being too long or having a cross-section that's too thin. Verify that the extension cable is at least 1.5 mm[2] and no more than 25 m long. If using a longer cable, the minimum cross-section should be 2.5 mm[2]. It may also be that the socket is too far from the mains supply or the cross-section of the mains cable is too thin, so it is recommended that you check the extension cable.
What to do if Makita UD2500 shredding material is not drawn into the shredder?
If the shredding material is not being drawn into your Makita Paper Shredder, the material might be too soft or wet; try pushing it down with a branch. Another reason could be that shredding material is caught in the filling hopper, so switch off the device and switch the forward/reverse switch into reverse direction. Switch on the device to release the material to be shredded, remove any foreign matter and switch the device off again. Turn back the direction of forward rotation. The fixed counter blade may also not be adequately adjusted, so adjust the counter blade. Lastly, the cutting roller may be worn; in this case, adjust the fixed counter blade, and if the cutting roller is severely worn, replace it.
What to do if Makita UD2500 Paper Shredder motor sounds but does not start?
If the motor of your Makita Paper Shredder makes a sound but doesn't start, it could be due to a blocked cutting roller. To resolve this, turn off the device, switch the forward/reverse switch into reverse direction, and switch on the machine until the jam has been cleared, then switch the machine off again and turn back the direction of forward rotation. Another potential cause is a capacitor fault, in which case you should bring the machine to an authorized service center for repair.
Details necessary safety gear like gloves, glasses, and hearing protection.
Covers safe connection, grounding, and use of extension cords and RCDs.
Instructions on keeping body parts away from openings and maintaining balance during feeding.
What to do if the machine vibrates, makes unusual noise, or strikes an object.
Details on what materials can and cannot be shredded, and how to feed them.
Step-by-step guide to adjust the gap between the counter blade and cutting roller.
General| Power | 2500 W |
|---|---|
| Product color | Black, Cyan |
| Cutting system | Blade |
| Rated speed (max) | 40 RPM |
| Material throughput | - kg/h |
| Collection box capacity | 67 L |
Weight and Dimensions| Weight | 27600 g |
|---|
To Next Page
