Need help?Do you have a question about the Makita XAG13 and is the answer not in the manual?
General| Type | Angle Grinder |
|---|---|
| Battery Voltage | 18V |
| No Load Speed | 8, 500 RPM |
| Motor Type | Brushless |
| Switch Type | Slide switch |
| Wheel Diameter | 115mm |
| Features | Electric brake, Soft start, Anti-restart protection |
| Spindle Thread | 5/8 - 11 |
Covers general precautions for safe use of power tools, cord handling, and outdoor use.
Emphasizes staying alert, using PPE, and preventing accidental starting and injury.
Focuses on maintaining a clean, well-lit area and keeping bystanders away.
Details precautions related to electrical connections, grounding, and water exposure.
General safety advice for various grinding and abrasive cutting operations.
Explains kickback and provides methods to avoid it, focusing on grip and body positioning.
Details specific safety measures for grinding and abrasive cutting, including wheel selection and guard use.
Provides extra safety instructions for specific wheel types and usage scenarios.
Focuses on safety precautions when using sanding discs and paper.
Outlines safety practices for using wire brushes, including guard usage.
Step-by-step guide for safely installing and removing the battery pack.
Describes how the tool stops automatically when drawing excessive current.
Explains automatic shutdown due to overheating and cool-down procedure.
Details automatic tool stoppage when battery capacity is too low.
Instructions for securely attaching the side grip handle to the tool.
Guidance on fitting and removing the wheel guard for various wheel types.
Specific instructions for installing the wheel guard using a clamp lever.
Instructions for installing the wheel guard using a locking screw.
Details how to perform grinding and sanding, including angles and break-in periods.
Explains safe operation procedures for abrasive cut-off and diamond wheels.
Instructions for using wire cup brushes, including installation and pressure warnings.
Guidance on operating the tool with wire wheel brushes, including safety checks.
Instructions regarding the battery guard, emphasizing its importance and not removing it.
To Next Page
