Need help?Do you have a question about the Makita XDT14 and is the answer not in the manual?
General| Motor Type | Brushless |
|---|---|
| Max Torque | 1, 500 in.lbs. |
| No Load Speed | 0-3, 400 RPM |
| Impacts Per Minute | 0 - 3, 800 IPM |
| Chuck Size | 1/4" Hex |
| Voltage | 18V |
| Battery Type | Lithium-Ion |
| Tool Length | 5-3/8" |
| Variable Speed | Yes |
| LED Light | Yes |
| Quick Release Hex Chuck | Yes |
| Battery Compatibility | Makita 18V LXT |
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Keep work area clean, well-lit, and free from flammable materials. Avoid distractions.
Ensure proper electrical connections and avoid using damaged cords.
Shows symbols used for tool indicators and functions.
Advice on charging, storage, and usage to maximize battery longevity.
Step-by-step guide for installing and removing the battery pack.
Describes the tool's automatic stop when drawing excessive current.
Explains the automatic stop when the tool or battery overheats.
Covers the automatic stop when battery capacity is critically low.
How to operate the tool using the switch trigger for starting, stopping, and speed control.
Step-by-step guide for installing and removing bits.
How to install the hook for temporarily hanging the tool.
To Next Page
