Need help?Do you have a question about the Makita XFD10R and is the answer not in the manual?
Details the model number, drilling, fastening, speed, voltage, and weight.
Covers keeping the work area clean, well-lit, and free from hazards.
Essential rules for safe electrical connections and handling of power tools.
Advice on staying alert, using PPE, and preventing accidental starts.
Guidance on using the correct tool, maintenance, and safe operation.
Instructions for charging, storing, and handling battery cartridges safely.
Emphasizes using qualified personnel for repairs and maintenance.
Specific safety advice for operating cordless driver drills, including handling and hazards.
Crucial advice to save instructions and heed general warnings for safe use.
Explains the meaning of various symbols used on the tool and in the manual.
Covers reading instructions, not disassembling, avoiding shorts, and proper disposal.
Guidance on charging, recharging, and storing batteries for extended life.
Step-by-step instructions and safety precautions for inserting and removing battery cartridges.
Explains the built-in protection system for Lithium-ion batteries.
Explains indicator lamps for battery charge level and status like overload or low voltage.
How to use the check button and indicator lamps to see the remaining battery charge.
Instructions on how to start, stop, and control tool speed using the switch trigger.
Information on the electric brake and when to seek service if it malfunctions.
How to activate and use the front lamp for illumination.
Instructions on how to change speed settings for different operations.
How to control the direction of rotation using the reversing switch.
How to adjust the fastening torque using the adjusting ring and graduations.
Step-by-step guide for inserting and removing drill bits or driver bits from the chuck.
Instructions for attaching the accessory hook to the tool for temporary storage.
How to install the driver bit holder for convenient storage.
Important cautions on battery insertion and managing tool load to prevent damage.
Steps and tips for effective screwdriving, including torque adjustment and pilot holes.
Guidance for drilling in wood and metal, including tool handling and lubricant use.
Safety measures and cleaning advice before performing maintenance.
Detailed steps for checking and replacing worn carbon brushes on the tool.
Final steps for brush replacement, tool break-in, and checking brake function.
List of recommended optional accessories for use with the tool.
Overview of the warranty policy, coverage, and duration.
To Next Page
General
