Need help?Do you have a question about the Makita XFD10 and is the answer not in the manual?
General| Chuck Size | 1/2 inch |
|---|---|
| Max RPM | 1, 900 RPM |
| Max Torque | 480 in.lbs. |
| Battery Type | 18V LXT Lithium-Ion |
| No Load Speed | 0 - 600 / 0 - 1, 900 RPM |
| Voltage | 18V |
| Overall Length | 7-3/4 inches |
| Length | 7-3/4 inches |
Details model, capacities, speeds, voltage, and weight.
Guidelines for a safe operating environment.
Tips to prevent electric shock hazards.
Advice on alertness, PPE, and proper operation.
Proper use of dust collection systems for hazard reduction.
Using correct tools and maintaining them for optimal performance.
Disconnecting power and safe storage procedures.
Preventing misuse and ensuring tool readiness.
Using specified chargers and battery packs for safety.
Preventing short circuits and safe battery storage.
Firm footing, firm grip, keeping hands clear of moving parts.
Electrical wire contact, hot parts, and toxic materials precautions.
Read instructions, avoid disassembly, check operating time.
Avoid shorting, store properly, avoid physical damage.
Temperature limits for storage and disposal regulations.
Charge before full discharge, avoid overcharging for longevity.
Recommended charging temp and long-term storage.
Procedure for inserting and removing the battery cartridge.
Information on the battery's built-in protection system.
How to check the remaining battery capacity using indicators.
How to start, stop, and control tool speed.
Description of the tool's electric braking system.
How to activate and use the tool's integrated lamp.
How to adjust the tool's speed settings using the lever.
Table showing speed lever settings and operation types.
How to change the direction of rotation using the switch.
How to set the torque control ring for different fasteners.
Table relating torque settings to common screw sizes.
Procedure for inserting and removing bits from the chuck.
How to attach the tool's hanging hook to the housing.
How to attach the optional driver bit holder accessory.
Ensuring battery is fully locked for safe operation.
Reducing load and proper tool handling for control.
Steps for driving screws, including torque adjustment.
Tips for drilling holes effectively in wood.
Tips for drilling holes safely and effectively in metal.
Step-by-step guide for replacing worn carbon brushes.
List of recommended accessories for use with the tool.
Overview of the limited one-year warranty terms and conditions.
Warning on chemicals in dust and safety precautions for exposure.
To Next Page
