Need help?Do you have a question about the Makita XMT04 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Oscillation Angle | 3.2° |
| No Load Speed | 6, 000 - 20, 000 OPM |
| Battery Type | Lithium-Ion |
| Battery | Not included |
| Type | Multi Tool |
Introduction to the Makita Cordless Multi Tool XMT04.
Details on oscillation rate, angle, length, weight, and voltage.
Lists compatible Makita battery cartridges and chargers.
Shows adaptable application tools for the multi tool.
Covers work area and electrical safety precautions for power tools.
Advises on staying alert, protective equipment, and preventing unintentional starting.
Guidelines for safe operation and care of power tools and battery packs.
Safety instructions unique to cordless multi tools.
Important safety instructions for handling and using battery cartridges.
Tips for maintaining maximum battery life and performance.
How to check the remaining battery capacity using indicator lamps.
Details on overload, overheat, overdischarge, and protection lock functions.
Instructions on how to operate the slide switch for starting and stopping the tool.
How to adjust the orbital stroke rate using the dial.
Explanation of constant speed control, soft start, and re-start prevention.
Steps for correctly installing and removing the battery cartridge.
Guide on how to install and remove application tools.
Instructions for using the sanding application tool and general sanding tips.
Guidance for cutting, sawing, and scraping operations with the multi tool.
How to install and remove the dust extraction attachment for sanding.
To Next Page
