Need help?Do you have a question about the Makita XNB01 and is the answer not in the manual?
Safety precautions for the work environment, cleanliness, and lighting.
Precautions related to electrical connections and avoiding shock.
Guidelines for operator alertness, PPE, and safe tool handling.
Safe practices for tool handling, workpiece contact, and fastener jams.
Warnings against cable use and importance of safety gear.
Essential safety guidelines for battery usage and storage.
How to prevent battery short circuits and potential hazards.
Steps for safely installing and removing the battery.
How to check the battery's remaining charge level.
Explanation of the tool's built-in safety mechanisms.
Tool stops automatically when overheated; allow to cool.
Tool stops; battery indicator lights up; allow battery to cool.
Instructions for correctly loading and unloading nails into the magazine.
How to use and install the nose adapter for surface protection.
Checking the trigger and safety lever for proper operation before use.
Step-by-step guide on how to drive nails using the tool.
How to perform sequential nailing for accuracy.
How to perform continuous and intermittent nailing.
How to clean the magazine if the pusher movement is stiff.
To Next Page
General
