Need help?Do you have a question about the Makita XOC01 and is the answer not in the manual?
Safety measures for maintaining a clean and hazard-free work environment.
Precautions to prevent electric shock when operating power tools.
Guidelines for operator alertness, protective equipment, and safe handling.
Instructions for forcing, switching, storing, and handling power tools.
Advice on maintaining tools, cutting tools, and using accessories correctly.
Safety and usage instructions for battery cartridges and chargers.
Key safety practices for operating the tool, including workpiece securing and bit checks.
Specific safety measures for cutting operations, bit inspection, and hazard avoidance.
Instructions for reading warnings, handling, and not disassembling battery cartridges.
Procedure for safely installing and removing the battery cartridge.
Explanation of the system that cuts off power to protect the motor and battery.
Steps to adjust the cutting depth using the shoe and thumb screw.
How to operate the slide switch for starting, continuous operation, and stopping.
Mechanism to prevent accidental tool startup.
Procedure for installing and removing bits using the shaft lock.
Steps for changing the collet cone for different bits.
Guidelines for securely tightening bits, holding the tool, and making cuts.
Steps to install the circular guide accessory.
Procedure to adjust cutting depth with the shoe and circular guide.
How to use the circular guide to cut circles of specific sizes.
Recommended angle and technique for using the multipurpose bit.
Procedure for attaching the vacuum cover for dust collection.
How to connect the tool to a Makita vacuum cleaner or dust collector.
Instructions for checking and replacing worn carbon brushes.
List of recommended accessories for use with the tool.
Terms and conditions of the one-year limited warranty.
Safety measures for maintaining a clean and hazard-free work environment.
Precautions to prevent electric shock when operating power tools.
Guidelines for operator alertness, protective equipment, and safe handling.
Instructions for forcing, switching, storing, and handling power tools.
Advice on maintaining tools, cutting tools, and using accessories correctly.
Safety and usage instructions for battery cartridges and chargers.
Key safety practices for operating the tool, including workpiece securing and bit checks.
Specific safety measures for cutting operations, bit inspection, and hazard avoidance.
Instructions for reading warnings, handling, and not disassembling battery cartridges.
Procedure for safely installing and removing the battery cartridge.
Explanation of the system that cuts off power to protect the motor and battery.
Steps to adjust the cutting depth using the shoe and thumb screw.
How to operate the slide switch for starting, continuous operation, and stopping.
Mechanism to prevent accidental tool startup.
Procedure for installing and removing bits using the shaft lock.
Steps for changing the collet cone for different bits.
Guidelines for securely tightening bits, holding the tool, and making cuts.
Steps to install the circular guide accessory.
Procedure to adjust cutting depth with the shoe and circular guide.
How to use the circular guide to cut circles of specific sizes.
Recommended angle and technique for using the multipurpose bit.
Procedure for attaching the vacuum cover for dust collection.
How to connect the tool to a Makita vacuum cleaner or dust collector.
Instructions for checking and replacing worn carbon brushes.
List of recommended accessories for use with the tool.
Terms and conditions of the one-year limited warranty.
General| Brand | Makita |
|---|---|
| Model | XOC01 |
| Category | Cut-off machines |
| Language | English |
To Next Page
