Need help?Do you have a question about the Makita XRM02 and is the answer not in the manual?
Power| ac power adaptor | DC12 V 700 mA |
|---|---|
| battery backup | UM-3 (AA size) x 2 |
| cluster battery | 7.2 V - 18 V |
| slide battery | 9.6 V - 18 V |
Frequency Coverage| fm frequency coverage | 87.50 - 108 MHz (0.1 MHz/step) |
|---|---|
| am frequency coverage | 520 - 1, 710 kHz (10 kHz/step) |
Audio Output| loudspeaker | 3 inches 8 ohm |
|---|---|
| output power at 7.2 V | 0.5 W x 2 |
| output power at 9.6 V | 1 W x 2 |
| output power at 10.8 V | 1.2 W x 2 |
| output power at 12 V | 1.5 W x 2 |
| output power at 14.4 V | 2.2 W x 2 |
| output power at 18 V | 3.5 W x 2 |
Ports & Interfaces| input terminal | 3.5 mm dia. (AUX IN1/AUX IN2) |
|---|---|
| fm antenna system | soft bended rod antenna |
| am antenna system | bar antenna |
Weight and Dimensions| dimensions (w x h x d) | 280 x 302 x 163 mm (11” x 11-7/8” x 6-3/8”) |
|---|---|
| weight (without battery) | 4.0 kg (8.8 lbs) |
Essential safety guidelines for operating the radio, covering usage, environment, and body contact.
Specific safety rules for handling and using battery cartridges to prevent hazards.
Detailed identification and description of all physical controls and input terminals on the radio.
Step-by-step guide for installing backup and main battery packs into the radio.
Instructions for inserting and removing slide-type battery cartridges from the radio.
Instructions for inserting and removing cluster-type battery cartridges from the radio.
Configuring the radio to wake with a chosen station at a set time, including time and station selection.
To Next Page
