What to do if Makita XUX01 motor stops running after short use?
If the motor stops running after a short period, the rotation direction might be set in reverse. Try changing the direction using the reversing switch. Alternatively, the battery's charge level could be low, so recharge the battery or replace it if necessary. Overheating could also be the cause; stop using the tool and allow it to cool down.
How to fix Makita Power Tool that does not reach maximum RPM?
If your power tool isn't reaching its maximum RPM, first check if the battery is installed properly as described in the manual. If not, install the battery cartridge correctly. Also, the battery power may be dropping. Try recharging the battery; if that doesn't work, replace it. If the issue persists, the drive system may not be working correctly.
Why Makita Power Tool motor does not run?
The motor might not be running because the battery cartridge isn't installed properly. Ensure that the battery cartridge is correctly installed. Also, the battery might be under voltage. In this case, recharge the battery or replace it if recharging doesn't solve the issue. If these steps don't work, the drive system may not be functioning correctly.
General| Motor | Brushless |
|---|---|
| Voltage | 18V |
| Power Source | Battery |
| Battery Type | Lithium-Ion |
| Battery Platform | Makita 18V LXT |
| Battery Compatibility | Makita 18V LXT |
Details rotational speed for various attachments without load.
Lists compatible attachments for the cordless multi function power head.
Defines the product's intended purpose and limitations.
General safety advice applicable to all power tools.
Safety considerations for the operating environment.
Safety precautions related to electrical aspects of the tool.
Safety tips for the operator's well-being.
Guidance on using and maintaining the tool safely.
Critical safety advice for handling and using battery cartridges.
Explanation of symbols used throughout the manual.
Instructions for safely installing and removing the battery.
Explanation of the tool's automatic shut-off protection system.
How to check the remaining battery power using indicator lamps.
Operation of the main power button and auto power-off function.
How to adjust the tool's speed using the main power button.
Instructions for attaching the handle and barrier to the tool.
Warning regarding the removal or damage of the battery guard.
To Next Page
