Need help?Do you have a question about the Maktec MT401 and is the answer not in the manual?
Symbols indicating the need to read the manual and the tool's double insulation safety feature.
Specifies the tool's purpose for blowing dust and requirements for power supply connection.
Details on A-weighted noise levels and declared vibration emission values for safe operation.
Guidance on waste disposal in EU countries and manufacturer's declaration of conformity.
Guidelines for maintaining a clean, well-lit work area and keeping bystanders away.
Instructions on plug compatibility, avoiding grounded surfaces, and using RCDs.
Advice on staying alert, using PPE, preventing unintentional starting, and proper dressing.
Instructions on not forcing the tool, proper maintenance, and using accessories correctly.
Guidance on having the tool serviced by qualified personnel and proper lubrication.
Safety advice specific to blower operation, including eye protection and avoiding blockages.
Instructions on how to start, stop, and lock the switch trigger for continuous operation.
Explanation of how to use the air volume adjusting dial to control speed and volume.
Step-by-step guide on how to attach and detach the standard nozzle.
Instructions for installing and using the sash nozzle for tight spaces.
Guidance on how to store the sash nozzle conveniently when not in use.
Instructions on how to operate the blower by pointing and turning on the tool.
Warnings against using harsh chemicals and advice on seeking professional servicing.
General| Air Volume | 3.5 m³/min |
|---|---|
| Weight | 1.5 kg |
| Dimensions | 427 x 161 x 212 mm |
| No Load Speed | 8, 500 - 16, 000 RPM |
| Voltage | 220 - 240 V |
| Frequency | 50/60 Hz |
| Cable Length | 2 m |
To Next Page