Need help?Do you have a question about the Maktec MT870 and is the answer not in the manual?
General| Chuck type | SDS Plus |
|---|---|
| Adjustable speed | Yes |
| Impact energy (max) | 1.9 J |
| Drilling diameter in wood (max) | 32 mm |
| Drilling diameter in steel (max) | 19 mm |
| Power source | AC |
Weight and Dimensions| Weight | 2500 g |
|---|
Keep the work area clean and well lit. Avoid explosive atmospheres and keep bystanders away.
Match plugs to outlets. Avoid contact with earthed surfaces. Do not expose to rain.
Stay alert, use PPE, prevent unintentional starting, and dress properly.
Do not force the tool, maintain it, use sharp tools, and follow instructions.
Have the tool serviced by qualified personnel using identical replacement parts.
Details on using the switch trigger and lock button for starting, stopping, and continuous operation.
How to change the rotation direction using the reversing switch lever.
How to change between rotation only and rotation with hammering modes.
Explanation of the torque limiter function and when it actuates.
Instructions for installing and positioning the auxiliary handle for safety.
Guidance on applying bit grease for smooth action and longer service life.
Steps to insert and remove bits from the chuck securely.
How to use and adjust the depth gauge for uniform hole depth.
Instructions for performing hammer drilling, including grip and pressure.
Guidance on using the drill chuck for drilling in wood or metal.
Specific instructions for diamond core drilling operations.
To Next Page