Need help?Do you have a question about the Malaguti Phantom F-12 and is the answer not in the manual?
Explains symbols and abbreviations used in the manual for better understanding.
Explains safety advice for riders and maintenance personnel, including hazard symbols.
Explains hazard, operational, and reference symbols for safe usage.
Lists main components like controls, tanks, and coolant system parts.
Describes the procedure for adjusting the engine's idle speed.
Details the various parts that make up the vehicle's bodywork and fairings.
Details the removal of wheels, brake components, and handlebar controls.
Provides overall vehicle specifications like dimensions, weight, and engine details.
Details specifications for chassis, suspension systems, and brake components.
Explains how to locate the frame number and the engine serial number.
Identifies key motorcycle components using numbered diagrams and labels.
Identifies and describes all controls located on the handlebars.
Describes the speedometer, warning lights, fuel gauge, and clock.
Details the instruments and indicators on the dashboard, including temperature.
Describes how to open the seat to access the fuel and oil tanks.
Specifies fuel type, recommended oil, and tank capacities.
Explains coolant level check, indicator lights, and topping up procedure.
Details how to access and adjust the engine's idle speed.
Explains how to adjust the spring preload for the rear shock absorber.
Details how to adjust the steering play for optimal handling.
Lists and illustrates the various plastic parts that constitute the vehicle's fairings.
Details removing the upper part of the dashboard assembly and handlebar cover.
Details the process of replacing the dashboard wiring harness.
Describes removal of odometer, clock, and handlebar-mounted controls.
Details the removal of disc brake pumps and the front shield.
Details removal of front fender, inspection cover, and rear fairing.
Details removal of taillight protection grid and kickstand.
Explains the procedures for removing the footboard and leg-guard.
Details the procedures for removing the front and rear wheels.
Details the removal of the exhaust pipe and fork leg assembly.
Details fork leg disassembly and how to check the oil level.
Details the process of changing fork oil and removing the entire fork assembly.
Details the removal of the fork and the front brake caliper.
Describes how to check front brake pad and disc wear.
Lists general precautions and checks for the hydraulic braking system.
Details checking rear brake pad and disc wear.
Explains how to replace the rear brake pads.
Details the removal of the key switch assembly and the oil reservoir.
Details fuel tank removal and essential safety precautions.
Details emptying the fuel tank and removing the float unit.
Details radiator removal and proper handling of coolant.
Details the extensive process of removing the engine from the frame.
Describes the maintenance procedures for the air and fuel filters.
Explains how to check frame dimensions for distortion after an accident.
Describes how to access the spark plug and headlight bulbs.
Explains taillight access and headlight beam adjustment.
Details how to replace bulbs in lighting systems.
Explains how to access internal dashboard components.
Details replacing bulbs in direction indicators and dashboard warning lights.
Details replacement of warning light LEDs and relays.
Describes how to access and check the battery level.
Explains how to replace the fuse.
Illustrates the location of key electrical components on the motorcycle.
Provides guidance for installing engine-related electrical parts.
Lists electrical components with their descriptions and part numbers.
Provides a legend for electrical wire colors used in the diagrams.
Presents the overall wiring diagram of the motorcycle's electrical system.
Lists electrical components referenced in the wiring diagram.
To Next Page
General