Malaguti CENTRO SO 4T User Manual

List of technical abbreviations used in the manual for quick reference.

Explanations of technical terms and units of measurement for clarity.

Symbols indicating operational procedures and references within the manual.

Symbols indicating safety warnings, hazards, and risks to personnel or environment.

Symbols for safety equipment, important notes, and technician roles.

Vehicle dimensions, weight, and fluid capacities for reference.

Engine type, bore, stroke, capacity, and fuel system specifications.

Brake system type, caliper details, and suspension specifications.

Chassis construction material and tire size and load ratings.

Battery type and capacity, and ignition system type.

Location and importance of VIN and engine identification numbers.

Details regarding the vehicle's anti-tampering plate.

Tyre sizes, load/speed indexes, and tubeless type.

Minimum tread depth requirement and identification of wear indicators.

Recommended tyre pressure for optimal performance and wear.

How to access the fuel tank and details of its total and reserve capacity.

Procedure for checking the engine oil level.

Steps for changing engine oil and cleaning the oil filter.

How to check and change the transmission oil.

Procedure for checking the front brake fluid level.

Procedure for changing the front brake fluid.

Steps to bleed the front brake caliper system to remove air.

Procedure for checking brake pad and disc wear.

Procedure for replacing front brake pads.

Adjusting the rear brake lever idle stroke.

Procedure to check the oil level in the fork leg.

Steps for changing the fork oil.

Description of speedometer, odometer, indicators, fuel, and battery level.

Procedure for setting date, time, and minutes on the digital clock.

Understanding key switch positions and procedures for key loss.

Steps and precautions for starting the engine.

Description of buttons and levers on the left and right handlebars.

Information on headlight bulb types and wattage.

Procedure for adjusting the headlight beam for optimal road illumination.

Information on front turn signal bulb type and replacement.

Identification of rear tail, brake, and turn signal lights.

Procedure for replacing rear light bulbs.

How to check the number plate light's operation.

Procedure for replacing the number plate light bulb.

Details of fuse types and their location in the front case.

Steps and precautions for replacing blown fuses.

Steps to install the battery in the vehicle's compartment.

Precautions for connecting battery wiring and safety guidelines.

Steps for charging the battery using the electrical outlet or external charger.

Safety warnings regarding battery acid and charging, plus maintenance tips.

Recommended spark plug type and replacement interval.

How to examine spark plug condition and set the electrode gap.

Procedure for installing a new spark plug with correct tightening.

General note regarding reassembly of components.

Procedure to remove rear-view mirrors (left and right).

Procedure to remove the upper cover.

Steps to remove the front handlebar cover carefully.

Procedure to remove the front cover assembly.

Accessing antitheft and key switch connectors after front cover removal.

How to access the fuel tank filler via the helmet compartment.

Procedure to remove the seat locking device and its cable.

Accessing fuel tank, fuel level gauge, and gauge connector.

Steps to remove the fuel level sensor.

Steps to remove the fuel tank from the vehicle.

Safety warnings regarding fuel handling and tank operations.

Procedure to remove the central bar.

Accessing spark plug pipette and ground fixing screws.

Steps to remove the side struts.

Procedure to remove the passenger levers.

Steps to release and remove the footbar.

Procedure to remove the rear handle.

Procedure to remove the number plate light support.

Identification of rear light unit parts.

Steps to remove the full rear fairing.

Accessing the electric starter connector on the right side.

Accessing the fuel sensor connector on the left side.

Dismantling the front section of the rear fairing.

Dismantling the rear section of the rear fairing.

Procedure for removing the legshield bag holder hook.

Accessing key switch cover, fuse box, and charge plug.

Accessing front turn signals, key switch, horn, and fuse box.

Procedure to disconnect and remove the key switch.

Procedure for removing the front mudguard.

Steps to remove the front wheel from the fork.

Checking and replacing the front brake disc.

Order of parts for correct front wheel reassembly.

Procedure for removing the front brake caliper and handling brake fluid.

Steps to remove the front shield.

Procedure to remove the handlebar and associated controls.

Removing the dashboard and rear handlebar cover.

List of parts to remove before fork leg or full fork removal.

Steps to remove a single fork leg.

Notes on removing the full fork unit and bearings.

Steps to remove the muffler, with safety warnings.

Procedure to remove the rear wheel.

Procedure to remove the rear mudguard (left and right sides).

How to access the air filter for maintenance.

Procedure for cleaning and oiling the air filter element.

Steps to remove the shock absorber.

Procedure to remount the shock absorber.

List of parts to remove before engine removal.

Disconnecting flywheel connector and starter motor cables.

Releasing hose, spring, and rear brake cable.

Disconnecting oil fume, vacuum, and accelerator cables.

Removing clamp, sheaths, and starter connector.

Disconnecting spark plug and rear brake cable.

How to perform a frame size check after an accident.

Warning against deforming the frame to restore original distance.

Illustrations showing cable positioning, pipe system, and anchoring ties.