Need help?Do you have a question about the Malaguti Centro 160 and is the answer not in the manual?
General| Engine Type | Single-cylinder, 4-stroke |
|---|---|
| Fuel System | Carburetor |
| Transmission | CVT |
| Front Suspension | Telescopic fork |
| Rear Suspension | Single shock absorber |
| Front Brake | Disc |
| Rear Brake | Drum |
| Width | 700 mm |
| Cooling System | Air cooled |
| Fuel Capacity | 7.5 liters |
| Length | 2020 mm |
Guides the user through reassembling the oil pump.
Diagnoses common problems related to cylinder head, valves, and piston operation.
Explains how to measure engine compression and interpret results.
Details the procedure for checking and adjusting valve clearances.
Steps to remove the cylinder head from the engine.
Procedure to remove the piston from the cylinder.
Details on how to inspect the cylinder and piston for wear or damage.
Guides on inspecting, grinding, and adjusting valve seating.
Steps to mount the cylinder head back onto the engine.
How to verify the engine's valve and ignition timing.
Diagnoses common issues with the speed variator and clutch system.
Guides on how to correctly reassemble the clutch unit.
To Next Page
