Need help?Do you have a question about the Malaguti Centro 50 4T and is the answer not in the manual?
Procedure for inspecting the spark plug condition and testing spark plug cap resistance.
Steps to diagnose ignition problems by checking pick-up, key switch, and wiring connections.
Procedure for checking the fuse and measuring charging voltage to diagnose battery issues.
Steps to check stator resistance and wiring integrity for recharging system faults.
Procedure for checking fuses and battery voltage to diagnose starting motor issues.
Steps to test the starter motor's operation and the starter relay's functionality.
Procedure for checking the continuity of the key switch and the start switch.
Steps to check the stop switch and overall wiring for starting system faults.
Procedure for checking fuses and stator AC voltage for complete lighting system failure.
Steps to check white cable continuity and regulator DC voltage for lighting issues.
Procedure to verify the ground connection for the voltage regulator.
Steps to diagnose why the high beam headlight is not illuminating.
To Next Page
General