Need help?Do you have a question about the Malaguti Centro 125 and is the answer not in the manual?
General| Displacement | 124.6 cc |
|---|---|
| Cooling System | Air-cooled |
| Fuel System | Carburetor |
| Transmission | CVT |
| Front Suspension | Telescopic fork |
| Rear Suspension | Single shock absorber |
| Front Brake | Disc |
| Rear Brake | Drum |
| Width | 720 mm |
| Height | 1, 150 mm |
| Seat Height | 780 mm |
| Engine Type | Single cylinder, 4-stroke |
| Max Torque | 10.5 Nm at 6, 500 rpm |
Covers exploded view, disassembly, checks, and component tolerances for the oil pump.
Instructions for removing camshaft support, cylinder head, cylinder, and piston.
Covers valve clearance adjustment, checking springs/valves, and valve seat lapping.
Instructions for removing flywheel cover, magneto, freewheel gear, stator/pick-up, and water pump impeller.
Instructions for removing the engine casings and chain guide.
Procedures for measuring crankshaft eccentricity, end play, and radial play.
Guides on installing oil seals, gaskets, chain guide, and joining engine casings.
To Next Page
