Align the center block (A) with
the center of the hull.
Now, place the blocks (B)
underneath the seat. Mount the
blocks securely onto the inner
grooves.
Each block (B) should be
positioned as shown in this
picture.
Insert block (A) between the cut
edge and seat groove. Push the
block to lock into place.
5
2
3
Place center block (A) below the
hatch opening.
A
B
B
B
B
6
4
The center block (A) should be
positioned as shown in this
picture.
6
B
B
A. 3” x 2” x 8” (x1)
A
1
www.malibukayaks.com support@malibukayaks.com 1-877-952-9257
Malibu Kayaks LLC. all rights reserved.
Reinforcement Installation
X-Factor
B. 3”x 2” x 4 ¾” (x2)
C. 3”x 2” x 4 ½” (x4)
To Next Page
Need help?
General
