To Next PageTo Next Page
Need help?Do you have a question about the MallinCam SkyRaider DS10CTEC and is the answer not in the manual?
Outlines the necessary hardware and software for operating the SkyRaider DS10CTEC.
Step-by-step guide for downloading and installing the MallincamSky software and drivers.
Instructions on physically attaching the SkyRaider DS10CTEC camera to a computer and telescope.
Illustrates the procedure for capturing dark frames to reduce image noise.
Guides users on how to capture and apply flat frames for optical path correction.
Step-by-step guide for setting up the SkyRaider for planetary video imaging.
Step-by-step guide for setting up the SkyRaider for deep sky video imaging.
Details functions like Open, Save, Batch Save, and Recent Files within the File menu.
Describes functions for capturing images and videos, including Auto Capture.
How to select and activate the SkyRaider camera within the software.
Adjusting image resolution, gain, and exposure modes for the camera.
Explains how to adjust camera gain to improve image brightness and sensitivity.
Details the differences and usage of Video Mode and Trigger Mode for exposures.
Step-by-step guide on capturing and applying dark fields for noise reduction.
Instructions for capturing and applying flat fields to correct optical path variations.
How to stack images in real-time to improve signal-to-noise ratio.
Details how to manage the camera's cooling system for optimal performance.
Steps to install the DirectShow driver for video display software compatibility.
Resolving common issues like 'Failed to Start: SkyRaider' due to cable length.
Addressing 'Catastrophic failure' messages by reinstalling drivers.
Detailed explanation of how dark field correction works and its application.
General