Malmet WDS Series User Manual

Serial Number:
Supplied to:
Date Installed:
Installed by:
Issue 11
Head Office and Customer Service
ABN 95 001 717 791
9-11 McKay Avenue
PO Box 373
Leeton NSW 2705
Phone: +61 2 6953 7677
Email: info@malmet.com.au
Bedpan/Urinal Bottle and Utensil/Bowl
Washer Disinfector
Models WDS1; WDS3
Operation, Maintenance and
Installation Manual
Note: Due to Malmet’s Policy of continuous product improvement;
design and technical specifications are subject to change without notice.

Malmet WDS Series Specifications

General

Brand	Malmet
Model	WDS Series
Category	Laboratory Equipment
Language	English

Summary

Safety Instructions

Warnings

Important safety warnings and precautions for device operation and maintenance.

1.0 Design Parameters

1.1 Operating Cycles

Details of the available cleaning and disinfection cycles for different loads.

2.0 Installation and Commissioning

2.1 Installation

Procedures and considerations for the initial installation of the device.

2.1.1 Positioning the WDS

Guidelines for placing the washer disinfector in its operating location.

2.2 Service Connection and Layout Details

2.3 Plumbing

2.4 Electrical

2.5 Commissioning

3.0 Loading and Operation

3.1 Urinal Bottle / Bedpan - Loading

Instructions for loading urinal bottles and bedpans into the device.

3.2 Urinal Bottle / Bedpan – Operating Cycle

Step-by-step guide to running the operating cycle for bedpans/urinals.

3.3 Urinal Bottle Only - Loading

Instructions for loading only urinal bottles into the device.

3.4 Urinal Bottle Only – Operating Cycle

Step-by-step guide to running the operating cycle for urinal bottles only.

3.5 Bowl / Utensil - Loading

Instructions for loading bowls and utensils into the device.

3.6 Bowl / Utensil – Operating Cycle

4.0 Cycle of Operation

4.2 Detergent Warnings

4.3 Fault Indication

5.0 Maintenance

5.1 Daily Maintenance (Operator or Maintenance Technician)

Routine daily tasks for maintaining the device's cleanliness and readiness.

5.2 Bi-Monthly Maintenance (Maintenance Technician)

5.3 Recommended Preventative Maintenance Schedule

A schedule of preventative maintenance tasks for qualified personnel.

5.4 Fault Codes

5.5 Purge Reset (Operator)

5.6 Purge Detergent Line (Operator)

5.7 Purge Reset (Maintenance)

5.8 Purge Detergent Line (Maintenance)

5.9 Detergent Level and Load Cell Calibration

5.11 User Menu and Test Mode

6.3 Wiring Diagram (1ph devices)

6.4 Wiring Diagram (3ph devices)