22
EN
OPERATION
Initial start-up / charging the battery
Be sure to fully charge the internal battery of the unit before rst mobile use
(without mains power). To do this, connect the device to a standard household
mains socket using the power supply unit.
The charging time is about 5 - 8 hours. The charging status is indicated by
the charging LED ("CHARGE") on the back. The LED goes out as soon as the
battery is fully charged.
Establishing a BT connection
Select the BT mode by pressing MODE several times. Activate BT on your
smartphone/tablet/laptop. Connect to PSP-6AK.
Using the wireless microphones
Turn down the microphone volume (MIC VOL) completely before switching on
the microphones. Replace the batteries with identical models as soon as you
hear more noise or crackling.
To Next Page
Loading...