eXterNal cleaNiNG
Removable parts (the dose tank, basin and reservoir) may be rinsed easily with
water. We absolutely do not not recommend using a dishwasher. e machine
may be cleaned with water using a soft, non-abrasive sponge or damp cloth.
Do not use cleaning products or methods which are aggressive or solvent-
based, or special cleaning cloths.
Clean the coee spout regularly using a damp cloth. Regularly maintaining
your machine is essential for it to last, and for the quality of your espressos.
iNForMatioN For use
is machine is designed for the 1,2,3 Spresso
®
system. It only accepts 1,2,3Spresso
®
doses.
A
e arrow ashes white:
1 – Dose tank full:
Check the dose tank. If it is full, empty it.
2 – e percolator cover is open/wrongly positioned:
Return it to the correct position.
3 – Dose stuck in the percolator.
Open the cover and remove the dose if there is one.
Close the cover again.
If you use it without a dose, some of the hot water
will ow into the dose tank. Consider emptying it
when you rst use it without a dose.
B
e arrow ashes blue:
e reservoir is empty:
Check the reservoir . If the reservoir is empty , ll it again and press the button for the
desired cup of coee to continue. e machine is now ready for use.
If the problem persists, contact the after-sales service
cHaNGiNG tHe ButtoN ProGraMMiNG
Open the dose packaging. Put the dose into the appropriate place. Press and hold
your chosen button for 5 seconds: short cup, long cup. e arrow and the button to
be set will start to ash. Press the button to be set: the coee cycle will begin. When
the desired amount of coee is reached, press the button concerned again: the new
amount will be memorized by your machine. Repeat the same operation to set the
second button.
e maximum programmable amount is 14 cl.
To Next Page
