Malongo Eoh - Page 6

6
FILTER REPLACEMENT
Empty the water out of the tank ( ).
Remove the used filter ( ) and pulling upwards
and out of the tank.
Dispose of the used filter ( ) in the bin for
non-recyclable waste.
Remove the new filter from its bag ( ).
Dip the new filter ( ) in the fresh water and
stir to remove any air bubbles. Do not use the
rinsing water to make coee.
Insert the filter ( ) in the housing at the
bottom of the water tank ( ), press vertically
on the top of the filter to connect as required.
The filter ( ) must fit in its housing.
Fill the tank with fresh water ( ).
Place a large cup on the Strainer Grid ( ) and
rinse the machine: press the large coee button
( ) after inserting the plastic rinsing pod in the
machine (supplied with the machine).
Dispose of the rinsing water: your machine is
ready for use.
To reset the filter r
eplacement warning (central
blue light ( ) flashes slowly), press the two
coee option buttons ( and )simulta-
neously: the light will go out.
6
6
6
4
3 4
2
12
12
12
12
12
12
10