Malsch Homecare User Manual (English)

Questions and Answers:

S
Stacy LeeAug 5, 2025
What to do if Malsch Indoor Furnishing motors don't operate via the hand controller?
- N
  Nicholas PattersonAug 5, 2025
  If the motors of your Malsch Indoor Furnishing do not operate via the hand controller, several issues could be the cause. First, ensure the mains cable is properly plugged in and the socket is live. Next, check the cabling plug connection to both the motor and hand controller to make sure they are correctly connected. Also, verify that the hand controller functions are not locked and release them if they are. Finally, inspect the adjustment area for any obstructions and remove them. If these steps do not resolve the issue, the hand controller or motor may be faulty.
M
Michael BarrettAug 13, 2025
Why can't the side rails be set up properly on my Malsch Homecare Indoor Furnishing?
- L
  Larry MartinAug 13, 2025
  If the side rails of your Malsch Indoor Furnishing can no longer be set up properly, it may be due to a few reasons. Check all moving parts for any obstructions and remove them. Also, inspect the castors for any obstructions and clear them.
J
jwalshAug 20, 2025
What to do if Malsch Indoor Furnishing motors cut out after a longer period of operation?
- C
  Carrie DawsonAug 20, 2025
  If the motors of your Malsch Indoor Furnishing cut out after a longer period of operation, it is possible that the adjustment time or safe working load has been exceeded, causing the control unit to react to overheating. Allow the motor system to cool down properly.

Malsch Homecare Specifications

General

Brand	Malsch
Model	Homecare
Category	Indoor Furnishing
Language	English

Malsch Homecare User Manual

Table of Contents

Questions and Answers:

Malsch Homecare Specifications