Need help?Do you have a question about the Mamas & Papas Amelia and is the answer not in the manual?
General| Converts to Junior Bed | Yes |
|---|---|
| Age Suitability | From birth |
| Dimensions | H96 x W78 x L144cm |
| Adjustable Base | 3-position adjustable base |
| Material | Pine |
| Product Type | Crib |
| Color Options | White, Grey |
| Features | Converts to toddler bed |
Preparatory steps before commencing cot construction, including unpacking and reading instructions.
Connect the head end and foot end to the fixed side using barrel nuts and screws.
Attach the base brackets to the cot ends at the desired height for the base.
Attach the cot base to the fitted base brackets using base bracket nuts.
Install the bottom guides on the inside face of the cot ends for the drop-side.
Attach the middle guides to the cot ends to support the drop-side mechanism.
Slide the drop-side panel into the guides, aligning it with the top and bottom rails.
Slot the drop-side catches onto the narrow ends of the top guides.
Insert the drop-side rods into the holes in the underside of the top guides.
Fasten the drop-side assembly by screwing the top guides into the cot ends.
List and identification of the primary parts of the Amelia cot.
Identifies the necessary tools for assembling the cot.
Guidance on correctly orienting the cot ends, including mattress height marks.
Contact details for assistance, spare parts, or product issues.
Information regarding the product warranty and registration process.
To Next Page