mamivac SENSITIVE-CFH - User Manual

mamivac SENSITIVE-CFH

11 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

SENSITIVE-CFH

Operating instructions – electric breast pump

only for clinical use

REF 286000

As of 2018-12

GB1010029GB

Tel.: +49 (0) 71 56 / 1 76 02 - 100

Fax: +49 (0) 71 56 / 1 76 02 - 500

info@kaweco.de

KaWeCo GmbH

Gerlinger Str. 36-38

71254 Ditzingen

Germany

Questions and Answers

S
Stephanie CarpenterAug 9, 2025
How to fix mamivac SENSITIVE-CFH that does not start?
- E
  Eric BryantAug 9, 2025
  If your mamivac Breast Pump isn't starting, first, ensure you're using a fully charged battery or switch to mains operation. Check all connections between the power supply and the device, or between the rechargeable battery and the device. When using mains, the LED (e) should light up green, and when using the rechargeable battery, LED (f) should light up green. If LED (f) flashes red, the battery is weak; switch off the device and remove the battery. If the problem persists, consider returning the device.
H
Harold EdwardsAug 23, 2025
What to do if my mamivac SENSITIVE-CFH Breast Pump does not suck?
- Q
  qbowersAug 23, 2025
  If your mamivac Breast Pump isn't building up vacuum, start by checking the suction kit components. Inspect the breast shield valve for any cracks or soiling, and check the protective diaphragm for cracks. Ensure the protective diaphragm is inserted correctly, sitting flush and crinkle-free. Also, verify all tube connections are secure. If the status LED (c) lights up red, try switching the device off and on several times, waiting a minute before each attempt. If it remains unsuccessful after five tries, return the device to the manufacturer.

mamivac SENSITIVE-CFH Specifications

General

Brand	mamivac
Model	SENSITIVE-CFH
Category	Breast Pump
Language	English