Mamiya C3 User Manual

On
the
right
hand
spool holder
(16)
there
is
a
yellow
mark
which
moves
when the crank is
turned.
This
mark
is
provided
for
your
convenience:
align the
yellow
mark
with
the
white
mark
on the camera
body for
easy loading
and un-
loading
of
film.
3.
After the
film
has
been
positioned
over the film
gate,
and
the
end
has
been secured
to the
take-up spool,
turn the
filmwind crank
(2),
winding until
the start mark
(double-
headed arrow)
printed
on the
paper
backing
of the film
comes
into alignment
with the
start
marks
(18)
near
the
upper side
of the
film
gate. (Fig.
7)
4.
To close
the
backlid,
always
press
the both sides
of the
catch
button
tightly
so that
both right
and left
sides of the
back are securely
engaged
to the
body.
Lock by
turning the
backlid catch button
counterclockwise
so
that the
red
mark
moves
through an arc
of 90 degrees.
5.
Turn
filmwind
crank
(2)
in clockwise
direction
until it
stops.
The
first
frame
of film
will be
correct
position
for
exposure, while the
film counter
(
)
will
indicate numeral
1.
Turn
crank
counterclockwise
until it
stops,
then fold out of
the way.
6.
Repeat the above step
after
each
operation
of the
shutter.
-8-
www.orphancameras.com

Mamiya C3 Specifications

General

Brand	Mamiya
Model	C3
Category	Digital Camera
Language	English