Mammoth BioShieldUV MAFABioS18W - Page 2

Before installation turn off HVAC system and ensure all electrical connections are off.
Installation must be done by a certied HVAC technician and comply
with all national and local electrical and mechanical codes.
Installation Instructions
BioShield is a trademark of WY Trading Inc. 2232 Dell Range Blvd, Suite 281, Cheyenne, WY 82009
EPA Establishment Number 99470-CHN-1
BioShield
®
Ultraviolet Treatment Systems
2) Apply Installation emplate.
3) se drill or metal shear to cut openings or V bulbs.
*Avoid handling UV bulbs with bare hands
) Apply air seal strips as needed and secure BioShield deice with
sheet metal screws proided.
) Plug in power adaptor and connect to ture.
) Veriy both L & IH L indicator lights are on.
1) Identiy Suitable Location Ensure the UV bulbs will not hit nor inter-
fear with any equipments or ducting.
sku MAFABioS18W
1 att BioShield 11V)
Airow
Direction
Airow
Direction
UV lamps should be replaced on an annual basis or when any of the LED
Bulb indicator lights are not illuminated. While there still may be blue light
visible, the output of the UV light has decreased signicantly (the UV-C
wavelength is invisible).
eplace V Bulb Annually
You can reorder UV bulbs on www.BioShieldUV.com
Lamp part number MAFA18BBv2
2) Apply Installation Template.
3) Use drill or metal shear to cut openings for UV bulbs.*
*Avoid handling UV bulbs with bare hands
4) Apply air seal strips, as needed, and secure BioShield device with
sheet metal screws provided.
) Plug in power adaptor and connect to ture.
6) Verify both LEFT & RIGHT LED indicator lights are on.
1) Identify Suitable Location: Ensure the UV bulbs will not hit nor inter-
fear with any equipments or ducting.
sku MAFABioS18W
18 Watt BioShield (110V)
Airow
Direction
Airow
Direction