Mammoth R6GD Series User Manual

ATTENTION INSTALLERS:
It is your responsibility to know this product better than your customer. This includes being able to install the product according
to strict safety guidelines and instructing the customer on how to operate and maintain the equipment for the life of the product.
Safety should always be the deciding factor when installing this product and using common sense plays an important role as
well. Pay attention to all safety warnings and any other special notes highlighted in the manual. Improper installation of the unit
or failure to follow safety warnings could result in serious injury, death, or property damage. These instructions are primarily
intended to assist qualifi ed individuals experienced in the proper installation of this appliance. Some local codes require
licensed installation/service personnel for this type of equipment. After completing the installation, return these instructions to
the customer’s package for future reference.
WARNING:
!
DO NOT DESTROY. PLEASE READ CAREFULLY AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
FIRE OR EXPLOSION HAZARD
• Failure to follow safety warnings exactly
could result in serious injury or property
damage.
• Installation and service must be performed
by a qualifi ed installer, service agency or the
gas supplier.
• Do not store or use gasoline or other
fl ammable vapors and liquids in the vicinity
of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not
use any phone in your building.
• Leave the building immediately.
• Immediately call your gas supplier from a
neighbors phone. Follow the gas suppliers
instructions.
• If you cannot reach your gas supplier, call
the fi re department.
13 SEER
Single Package Gas Heating / Electric Cooling - 3 Phase
R6GD SERIES
Premium Model Shown
USER’s MANUAL & INSTALLATION INSTRUCTIONS

Mammoth R6GD Series Specifications

General

Brand	Mammoth
Model	R6GD Series
Category	Air Conditioner
Language	English

Summary

User Information

Important Safety Information

Highlights essential safety precautions for users to prevent injury or damage.

Operating Instructions

Provides step-by-step guidance on operating the unit in different modes.

Turning the Air Conditioner Off

Details the procedure for safely turning the air conditioner unit off.

Operating the Indoor Blower Continuously

Explains how to operate the indoor blower continuously for air circulation.

Air Conditioner Maintenance

Offers basic maintenance tips for users to keep the unit running efficiently.

Troubleshooting

Provides basic troubleshooting steps for common user-encountered issues.

Installer Information

Important Safety Information

Covers critical safety warnings and precautions for installation and service personnel.

Requirements and Codes

Details applicable codes, standards, and regulations for installation.

General Information

Provides unit overview, installation site considerations, and initial checks.

Unit Installation

Details procedures for packaging removal, rigging, clearances, and mounting.

Electrical Wiring

Outlines electrical connection requirements, voltage, grounding, and wiring diagrams.

Gas Supply and Piping

Details gas piping installation, leak testing, and conversion procedures.

Start Up and Adjustments

Guides for pre-start checks, system startup, and operational adjustments.

Equipment Maintenance

Provides guidelines for routine maintenance to ensure optimal performance and longevity.

Component Functions

Explains the operational role of key components within the unit.

Troubleshooting

Lists common fault conditions and diagnostic codes for troubleshooting.

Replacement Parts

Information on obtaining replacement parts for the unit.

Figures & Tables

Lists available figures and tables for unit specifications and data.

Installation/Performance Check List

A comprehensive checklist for verifying installation and performance criteria.