Need help?Do you have a question about the Mamo LEGA 420 and is the answer not in the manual?
Details the purpose, scope, and edition of the user manual.
Explains the manual's integral role in machine operation and safety.
Outlines proper handling, storage, and distribution of the manual.
Manufacturer's declarations, disclaimed responsibilities, and warnings regarding machine use.
Defines terms and typographic conventions used throughout the manual.
Explains safety work conditions and general instructions for operators.
Provides contact and location details for the manufacturer, Tosingraf S.r.l.
Details how to identify the machine model, serial number, and specifications.
Compliance with EU directives for machinery, low voltage, and electromagnetic compatibility.
Adherence to harmonized standards for risk assessment and safety signals.
Emphasizes reading the manual, following procedures, and using protective equipment.
Explains warranty terms for consumer vs. professional use based on Italian law.
Details conditions for guarantee validity, exclusions, and dispute resolution.
Design criteria meeting EU directives for safety, low voltage, and EMC.
Forbids tampering with machine protections and safety devices.
Specifies required staff qualifications for different machine lifecycle phases.
States the machine's acoustic pressure level is below 70 dB(A).
Lists model, dimensions, power, weight, and operational parameters.
Identifies and labels key components of the machine with numbers and letters.
Details the touch screen interface for controlling notching, covers, and machine settings.
Guidelines for machine delivery, packaging, and handling during transport.
Specifies conditions for temporary storage, including temperature and humidity.
Requirements for the installation area, room, and working surface.
Recommends industrial lighting levels (300-600 lux) for safe operation.
Specifies allowable temperature (15-40°C) and humidity (10-90%) for operation.
Details safety precautions and steps for connecting the machine to power.
Advises performing a test application before initial use and checking for vibrations.
States that only qualified and trained staff should operate the machine.
Describes the operator's starting position and machine elements.
Provides essential safety guidelines for operating the machine.
Step-by-step manual process for binding a book using the machine.
Explains the binding process for soft covers, including photosensor attention.
Describes the binding process for hard covers, noting the small gap for the cover.
How to put the machine in standby mode to retain glue temperature.
General description of the machine's intended use and single-user operation.
Lists unintended uses that can cause damage or are unsafe.
Routine cleaning and care recommendations for the machine.
Instructions for safely filling the glue tank with approved glue.
Procedures for replacing fuses, emphasizing qualified technician involvement.
How to request assistance for maintenance not covered by routine procedures.
Expected machine lifespan and guidelines for disposal.
Overview of the main screen displaying machine status and controls.
Details the options available in the main menu for settings and functions.
Explains how to view and reset the copy counter.
Adjustments for cover nipping height, pressure, and timing for optimal binding.
Explains input/output signals, sensors, and machine status indicators.
How to reset the machine to its zero position for proper operation.
General| Brand | Mamo |
|---|---|
| Model | LEGA 420 |
| Category | Booklet makers |
| Language | English |
To Next Page