Need help?Do you have a question about the MAN B&W S50MC-C and is the answer not in the manual?
Outlines the manual's structure and categorizes maintenance and overhaul procedures.
Detailed procedures for checking, dismantling, overhaul, and mounting of the cylinder cover.
Covers checking, dismantling, overhaul, and mounting of the piston, rod, and stuffing box.
Procedures for cylinder liner inspection, overhaul, and lubrication.
Procedures for checking, dismantling, overhaul, and mounting of the crosshead and connecting rod.
Maintenance procedures for the crankshaft, thrust bearing, and turning gear.
Procedures for mechanical control gear checking, dismantling, overhaul, and mounting.
Procedures for starting air system checking, dismantling, overhaul, and mounting.
Procedures for exhaust valve checking, dismantling, overhaul, and mounting.
Procedures for fuel oil system components checking, dismantling, overhaul, and mounting.
Procedures for turbocharger system checking, dismantling, overhaul, and mounting.
Procedures for safety equipment checking, dismantling, overhaul, and mounting.
Procedures for the assembly of major engine components.
Details on general tools and related maintenance procedures.
General| Bore | 500 mm |
|---|---|
| Fuel Type | Heavy Fuel Oil (HFO) |
| Cooling System | Water-cooled |
| Cylinder Configuration | In-line |
| Speed | 127 rpm |
| Maximum Continuous Rating (MCR) | 6, 550 - 19, 500 kW |
| Speed Range | 90 - 120 RPM |
| Engine Type | Two-stroke, low-speed diesel |
| Specific Fuel Oil Consumption | Approx. 167 g/kWh (depending on engine load and optimization) |
To Next Page
