Man D2862 LE423 User Manual

Commissioning and operation
39
Standard function: A reset signal is sent via the CAN bus to the engine monitoring and diagnostic
system control unit (engine terminal box) or to a data station. As long as the appropriate criteria
are fulfilled, the engine slow down or shutdown alarms arising are reset.
Additional function in the menu: Accept change and pass to the next parameter.
Function (Actuation for approx. 3 seconds): Switch-on and switch-off of the display (display only,
not on remote operation).
Additional display function (Brief actuation): Insertion of the info. display for approx. 5 seconds

Man D2862 LE423 Specifications

General

Engine Model	D2862 LE423
Bore	128 mm
Aspiration	Turbocharged and intercooled
Fuel Type	Diesel
Manufacturer	MAN
Fuel System	Common Rail
Cooling System	Liquid Cooled