SAFETY
Safety Section 1-8
© 2004 Alamo Group Inc.
SLR5&7 02/02
PARTS INFORMATION
M&W implements use matched system components for blades, hangers, rollers, and bearings. These parts
are made and tested to M&W specifications. Non-genuine "will fit" parts do not consistently meet these
specifications. The use of “will fit” parts may reduce implements performance, void mower warranties, and
present a safety hazard. Use genuine M&W mower parts for economy and safety. (SPNW-1)
SEE YOUR M&W DEALER
In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment,
hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper
training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer also to
Safety Messages and operation instruction in each of the appropriate sections of the Tractor and Equipment
Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment. (SG-18)
NOTE: M&W supplies safety decals on this product to promote safe operation. Damage to the decals may occur
while in shipping, use, or reconditioning. M&W cares about the safety of its customers, operators, and bystanders,
and will replace the safety decals on this product in the field, free of charge (Some shipping and handling charges
may apply). Contact your M&W dealer to order replacement decals.
To Next Page
Loading...