Manfrotto MVR911ECCN Firmware Update Procedure

Firmware Update procedure
Manfrotto MVR911ECCN
Requirements
In order to update the firmware, you will need:
1. a PC running the “Manfrotto Firmware Update GUI” software, and having a USB port available
2. a standard mini USB cable (not supplied) to connect the remote control and computer.
The cable must be mini-B male to A male.
FIX
VAR
FOCUS
PEED

Manfrotto MVR911ECCN Specifications

General

Interface	Wired
Input type	Press buttons
Product color	Black
Brand compatibility	Canon
Compatible products	EOS 1Dc, EOS 70D, EOS 6D, EOS 1Dx, EOS 5D Mark III, EOS 5D Mark II, EOS 1D Mark IV, EOS 7D, EOS 60D, EOS 600D/Rebel T3i/Kiss X5, EOS 550D/Rebel T2i/Kiss X4, EOS 500D/Rebel T1i/Kiss X3
Remote control proper use	Digital camera
Built-in display	No
Maximum range	5 m
Plug and Play	Yes
Number of devices supported	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Rechargeable	-

Weight and Dimensions

Weight	- g