EasyManuals Logo

Manfrotto MVR911ECCN User Manual

Manfrotto MVR911ECCN
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
MVR911ECCN user manual additional information_rev 2.1
Further notes
Canon 6D
- If [Wi-Fi] is set to [Enable], the camera cannot be remotely controlled via USB;
Please refer to the camera user manual to set [Wi-Fi] to [Disable]
Canon 70D
- If [Wi-Fi] is set to [Enable], the camera cannot be remotely controlled via USB;
Please refer to the camera user manual to set [Wi-Fi] to [Disable]
- If any of the advanced AF servo functions, i.e. [Continuous AF] or [Movie Servo AF], are set to [Enable], it could
interfere with the remote focus control, resulting in unexpected behaviour;
The recommended setting for use with the Manfrotto remote control, is
o [AF Method] set to [FlexiZoneAF-Single]
o [Continuous AF] and [Movie Servo AF] set to [Disable]
Please refer to the camera user manual to configure these options.
- NOTE: depending upon the interaction between the remote, the camera and the lens, the three focusing speeds may
not appear progressive (e.g. second speed slower than first one) for some lens models
Canon 1Dx
- While in video mode, to allow proper operation of the remote REC start/stop functionality, the Live View mode of the
camera, i.e. [LV set.], must be set to [Movies];
Please refer to the camera user manual to configure this option.
Canon 1Dc
- While in video mode, to allow proper operation of the remote REC start/stop functionality, the Live View mode of the
camera, i.e. [LV set.], must be set to [Movies];
Please refer to the camera user manual to configure this option.

Other manuals for Manfrotto MVR911ECCN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manfrotto MVR911ECCN and is the answer not in the manual?

Manfrotto MVR911ECCN Specifications

General IconGeneral
InterfaceWired
Input typePress buttons
Product colorBlack
Brand compatibilityCanon
Compatible productsEOS 1Dc, EOS 70D, EOS 6D, EOS 1Dx, EOS 5D Mark III, EOS 5D Mark II, EOS 1D Mark IV, EOS 7D, EOS 60D, EOS 600D/Rebel T3i/Kiss X5, EOS 550D/Rebel T2i/Kiss X4, EOS 500D/Rebel T1i/Kiss X3
Remote control proper useDigital camera
Built-in displayNo
Maximum range5 m
Plug and PlayYes
Number of devices supported1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Rechargeable-
Weight and Dimensions IconWeight and Dimensions
Weight- g

Related product manuals