EasyManua.ls Logo

Manhasset 1920 User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1.
Before beginning assembly, be su
re all parts are present using the parts list on the back of this page.
Do not dispose of
any packaging until assembly is complete.
2. Attach the UPPER and LOWER BARS to the HANDLE FRAME using the 8MM bolts, washers and lock washers as
illustrated in the diagram on the back page. At this point, it may be easier to undertake the next couple steps if the unit is
turned upside down.
3. Attach the UPPER and LOWER BARS to the END FRAME using the 8MM bolts, flat washers, lock washers and nuts.
The vertical extensions (legs) on the LOWER BARS are connected to the END FRAME using (4) bolts, washers and nuts.
The UPPER BARS are connected to the END FRAME with lock washers and bolts threaded into the threaded plugs on
the end of the upper rail, as illustrated in diagram.
4. With the large bolts, attach the 6” wheels to the HANDLE FRAME axle using a large washer on each side of the wheel.
Do not over-tighten; the wheels have to spin freely.
If there are any questions, Call us at (
800) 795
-
-
specialty.com
Tools Required:
3/4” or 19MM Wrench
1/2” or 13MM Wrench
5. Attach the 2 casters to the END FRAME. The threaded post on the
caster is connected using the star washer below the square tubing and
the flat washer, lock washer and nut above the square tubing.
6. Tighten all nuts and bolts securely on the entire cart and assembly. (If
the cart was turned upside down, it should be flipped back.)
7. Install the PLASTIC RAIL GUARDS. There are two different sets of
rail guards. The guards without cutout notches are to be fitted over the
top horizontal rails. The guards with the cutout notches are to be fitted
over the lower horizontal rails, with the notched areas lining up with the
legs. The installation requires spreading the sides of the guards at one
end and pushing them over the horizontal rails – working from one end
to the other.
8. For maximum storage when loading the stands onto the cart, be sure
to flip the desk all the way over backwards to the storage position as
shown at right.
Question and Answer IconNeed help?

Do you have a question about the Manhasset 1920 and is the answer not in the manual?

Manhasset 1920 Specifications

General IconGeneral
BrandManhasset
Model1920
CategoryOutdoor Cart
LanguageEnglish

Summary

Manhasset Short Stand Cart Assembly Instructions

Tools Required

List of tools needed for assembly, including wrenches.

Pre-Assembly Checks and Core Assembly

Verify parts, attach bars, wheels, and casters without final tightening.

Installing Plastic Rail Guards

Attach rail guards to horizontal rails, noting notched guards for lower rails.

Storage Position Guidance

Instructions on flipping the desk for optimal storage on the cart.

Related product manuals