EasyManua.ls Logo

Manhattan T3 - Hardware Specification

Manhattan T3
12 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Hardware Specification
Physical
Dimensions: (W) 210mm x (H) 46mm x (D) 188mm
Weight: 368 grams
Power
Source: 100-240V AC, 50/60Hz
Input: 12V 1.5A
Consumption: Under 13W (Active with no USB device attached)
Under 18W (Active with USB device attached)
Under 2W (Network Standby/Sleep)
Under 0.5W (Passive Standby)
Adapter model: MSA-C1500CS12.0-18G-GB
Connections
Ethernet: RJ45, IEEE802.3 10BASE-T / 100BASE-TX
Digital A/V: HDMI with HDCP 1.4/2.2 for resolutions up to 2160p @ 60Hz
Supports HDR10/HLG as specified in HDMI 2.0b
Digital Audio: Optical SPDIF
USB: USB 2.0, 5V 1A
Aerial input: IEC 169-2 Female (PAL)
Loop out: IEC 169-2 Male (PAL)
Wi-Fi
Modes: 802.11 b/g/n
Frequency range: 2412 - 2472MHz
Output power: Maximum 20dBm
Tuner
Standard: DVB-T / DVB-T2
Frequency range: UHF: 474 - 858MHz
Bandwidth: 7MHz & 8MHz
Signal level: -80dBm
~
-20dBm
Operating Conditions
Temperature: 0ºC - 40ºC
Humidity: 20% - 80% RH (non-condensing)
The information contained herein is subject to change without notice. Manhattan shall not be
liable for technical or editorial errors or omissions contained herein. v2 (16/05/19).
© 2019 Manhattan TV Limited. Manhattan is a registered trademark of Manhattan TV Limited.

Related product manuals