Manhattan T4-R - Connect Up; Required Connections; Optional Connections

4
1 2 3
You Need
• A TV with an HDMI input.
• A TV aerial and cable. While indoor (potable) aerials may pick up some Freeview
channels, for best results and full coverage, use a rootop aerial.
Required Connections
. Connect a TV aerial cable (not included) from your aerial wall socket to the
T•R's AERIAL IN socket.
. Connect the included HDMI cable from an HDMI socket on your TV to the T•R's
HDMI socket.
. Connect the included power adapter to the T•R's POWER socket, then plug the
other end into a wall socket that is turned o.
Optional Connections
• If you'd rather use a wired connection instead of Wi-Fi, connect an Ethernet cable
(not included) from the T•R's ETHERNET socket to your broadband router.
• To use your TV’s tuner, connect an aerial cable (not included) from your T•R's
LOOP OUT socket to your TV's aerial socket. Please note that to conseve energy,
the LOOP OUT socket is disabled in standby. However, ater set-up you can change
this by pressing HOME and going to: Setings > System > Standby Options.
• If you have an AV receiver that doesn't suppot HDMI, you can connect an optical
audio cable (not included) from your T•R's OPTICAL socket to your AV receiver.
Connect Up