4 - 3
INTRODUCTION
- A wide range of attachments studied and perfectly adapted to your lift truck is available and guaranteed by the
manufacturer.
- The attachments are delivered with a load chart concerning your lift truck. The operator's manual and the load chart
should be kept in the places provided in the lift truck. For standard attachments, their use is governed by the
instructions contained on this notice.
- Some particular uses require the adaptation of the attachment which is not provided in the price-listed options. Optional
solutions exist, consult your dealer.
Maximum loads are defined by the capacity of the lift truck and the attachment’s weight and
center of gravity. In the event of the attachment having less capacity than the lift truck, never
exceed the attachment’s limit.
WARNING
Certain attachments may, when the boom is lowered and retracted or if tilt is activated in the full
forward or reverse tilt direction, come into contact with the front tires and cause damage to them.
TO ELIMINATE THIS RISK, KEEP THE BOOM AND ATTACHMENT EXTENDED
SUFFICIENTLY TO AVOID SUCH CONTACT WITH THE TIRES!
WARNING
It is MANDATORY for all ATTACHMENTS WITH SUSPENDED LOAD CAPABILITY (Hoist, crane
boom, crane boom with winch, hook, etc.) be used on a fork lift fitted with an AUTOMATIC
HYDRAULIC MOVEMENT CUT-OFF.
IMPORTANT
Only attachments approved by the manufacturer are to be used on our lift trucks (See
TECHNICAL SPECIFICATIONS OF ATTACHMENTS in SECTION 4 - ADAPTABLE
ATTACHMENTS IN OPTION ON THE RANGE). The manufacturer's liability will be denied in
case of modification or attachment adaptation performed without permission.
IMPORTANT
To Next Page
Loading...
Need help?
General
