Manitou A Series - Page 88

2 - 48
FUNCTIONING
MLT MODELS
- Button 2 not engaged, buttons 3 and 4 control a hydraulic function.
- Pressing button 2, buttons 3 and 4 control another hydraulic function.
NOTE : Switch 5 enables the hydraulic function controlled by button 2 to be
locked. Indicator 6 lights up to show when it is in use.
12 - BOOM HEAD ELECTROVALVE + PREARRANGED
HYDRAULIC ATTACHMENT LOCKING*
The addition of these two options enables the combining of several hydraulic
functions.
13 - B
OOM HEAD ELECTROVALVE
+ ELECTRICAL
BOOM PROVISION* (MLT MODELS ONLY)
Adding these two options lets you combine several hydraulic functions. The
hydraulic attachment locking system can be added to this combination of
options.
NOTE : In these combinations of options, the transmission cut-out button
changes place and is located at 5.
FUNCTIONING
- Without pressing buttons 1 and 2, buttons 3 and 4 control a hydraulic
function.
- By pressing buttons 1 and 2, buttons 3 and 4 control another hydraulic
function.
* Option availability varies according to model/country.
3
4
2
5
6
3
4
1
2
5
FORKLIFT SAFETY
CONTENTS