2 - 50
17 - DUAL EFFECT HYDRAULIC TOWING HOOK
*
- Raise the hydraulic towing hook to free the nut on hook 1 (Fig. A) by pulling
the lever on distributor 2 (Fig. B) backwards or by pressing the top of switch
3 (Fig. C) depending on the model of lift truck.
- Pull handle 4 (Fig. D) maintain this position and push lever 2 (Fig. B)
forwards or press the bottom of switch 3 (Fig. C), depending on the model of
lift truck, to lower the towing hook.
- Release handle 4 (Fig D).
- Hook up or unhook the trailer.
- Raise the towing hook by pulling the lever on distributor 2 (Fig. B)
backwards or by pressing the top of switch 3 (Fig. C) depending on the
model of lift truck and then lower the hook again to check that the locking
axis is correctly on the nut of hook 1 (Fig. A).
18 - D
UAL EFFECT HYDRAULIC TOWING HOOK +
SINGLE OR DUAL EFFECT REAR HYDRAULIC
CONTROL PREDISPOSITION*
Switch 1 controls the towing hook or a rear hydraulic predisposition.
* Option availability varies according to model/country.
A
B D
MLT 629Turbo - MT732/932
Série A
C
MLT 730 -120 LS
Série A
MLT 633 LS Turbo
Série A
1
2
1
1
3
4
When unhooking, ensure that the trailer is supported
independently.
WARNING
To Next Page
Loading...
