Manitou E-E3 Series - Page 89

2-57
MT 732 Série E-E3
MT 932 Série E-E3
OPERATION
- Move the lever 1 to the left or right.
MT 1030 S Turbo Série 5-E3
OPERATION
- Raise lever 1 and turn to the left or right.
8 - PROVISION FOR ELECTRICAL JIB
Enables an electrical function to be used at the head of the jib foot.
MT 732 Série E-E3
MT 932 Série E-E3
ELECTRIC JIB FUNCTION CONTROL
- Set switch 1 to position B (indicator light on).
- Hold down button 2 and move the lever 3 to left or
right.
NOTE: Set switch 1 to position A (indicator light off)
controls the hydraulic attachment line (see: 2 -
DESCRIPTION: 18 - HYDRAULIC AND TRANSMISSION
CUT-OFF CONTROLS).
MT 1030 S Turbo Série 5-E3
ELECTRIC JIB FUNCTION CONTROL
- Set switch 1 to position B (indicator light on).
- Hold down button 2, raise and move the lever 3 to left
or right.
NOTE: Set switch 1 to position A (indicator light off)
controls the hydraulic attachment line (see: 2 -
DESCRIPTION: 18 - HYDRAULIC AND TRANSMISSION
CUT-OFF CONTROLS).
1
1
1
B
A
2
3
1
B
A
2
3
647083 EN (21/06/2011)