Manitou F-E3 Series - Page 101

2-69
20 - HYDRAULIC CONTROLS AND TRANSMISSION CUT-OFF
Do not attempt to alter the hydraulic system pressure by interfering with the pressure regulating valve. In the event of suspected malfunction, contact
your dealer. ANY ALTERATION MAY RENDER THE WARRANTY NULL AND VOID.
Use the hydraulic controls carefully without jerking, to avoid accidents caused byshaking the lift truck.
NOTE: When driving on the road, it is highly recommended (mandatory in Germany) that you cut-off all the hydraulic movements
(see: 2 - DESCRIPTION 7 - SWITCHES).
MLT 634 Turbo LSU Série F-E3
MLT 634 -120 LSU Série F-E3
MLT 634 -120 LSU POWERSHIFT Série F-E3
MLT 731 Turbo Série F-E3
MLT 735 Turbo LSU Série 6-E3
MLT 735 -120 LSU Série 6-E3
MLT 735 -120 LSU POWERSHIFT Série 6-E3
MLT 741 Turbo LSU Série 6-E3
MLT 741 -120 LSU Série 6-E3
MLT 741 -120 LSU POWERSHIFT Série 6-E3
NOTE: If necessary use the steering to reset the hydraulic
control steering accumulator.
A - Lifting and tilting control lever.
B - Telescoping control button.
C - Attachment control button.
D - Jib head electrovalve option control button.
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
TILT OF CARRIAGE
- The lever A to the left for reverse tilt.
- The lever A to the right for forward tilt.
TELESCOPING
- Button B forwards for extending.
- Button B backwards for retracting.
ATTACHMENT
- The button C forwards or backwards.
OPTION ELECTRIC PREDISPOSITION ON ELECTROVALVE
JIB AT HEAD JIB
- Button D (see: 2 - DESCRIPTION: DESCRIPTION AND
USE OF ELECTRICAL AND HYDRAULIC OPTIONS).
MLT 1035 L Turbo LSU Série 6-E3
NOTE: If necessary use the steering to reset the hydraulic
control steering accumulator.
A - Lifting and tilting control lever.
B - Telescoping control button.
C - Attachment control button.
D - Jib head electrovalve option control button.
E - Tilting corrector control button.
LIFTING THE LOAD
- The lever A backwards when lifting.
- The lever A forwards when lowering.
TILT OF CARRIAGE
- The lever A to the left for reverse tilt.
- The lever A to the right for forward tilt.
TELESCOPING
- Button B forwards for extending.
- Button B backwards for retracting.
ATTACHMENT
- The button C forwards or backwards.
OPTION ELECTRIC PREDISPOSITION ON ELECTROVALVE JIB AT HEAD JIB
- Button D (see: 2 - DESCRIPTION: DESCRIPTION AND USE OF ELECTRICAL AND
HYDRAULIC OPTIONS).
TILTING CORRECTOR
- Button E to the left to tilt the lift truck to the left.
- Button E to the right to tilt the lift truck to the right.
NOTE: Tilt can be corrected up to a carriage articulation axle height of 3m50 above the
ground, with the jib retracted.
N°266412
1
2
3
4
5
6
MLT 634 -120 LSU POWERSHIFT Série F-E3
MLT 735 -120 LSU POWERSHIFT Série 6-E3
MLT 741 -120 LSU POWERSHIFT Série 6-E3
A
C
D
B
N°255968
A
C
D
B
MLT 634 Turbo LSU Série F-E3 / MLT 634 -120 LSU Série F-E3
MLT 731 Turbo Série F-E3
MLT 735 Turbo LSU Série 6-E3 / MLT 735 -120 LSU Série 6-E3
MLT 741 Turbo LSU Série 6-E3 / MLT 741 -120 LSU Série 6-E3
E
N°272035
A
C
D
B