Need help?Do you have a question about the Manitou MC 18-2 D K ST3A S1 and is the answer not in the manual?
Instructions for managers on site, operator, truck suitability, and modification rules.
Requirements for the operator's manual and regulations for public highway use.
General instructions, authorization, and operating procedures for driving the lift truck.
Procedures for handling loads, including attachment selection and mass considerations.
Covers general maintenance, daily, periodic, and occasional tasks for the lift truck.
EC Declaration of Conformity and importance of safety plates and stickers.
Details on identification plates for the lift truck, engine, hydrostatic pump, and attachments.
Detailed specifications and dimensions for MC 18-2 and MC 18-4 models.
Data on mast dimensions, free lift, tilting, and load capacities for different configurations.
Information on tyre types, pressures, loads, and ground contact characteristics.
Comprehensive guide to all controls, instruments, and safety features within the driver's cab.
Importance of genuine parts and general guide to maintenance schedules.
Procedures for daily, weekly, and mandatory first 500-hour service intervals.
Detailed schedule and tasks for periodic maintenance at 500, 1000, and 2000-hour intervals.
Tasks for cleaning, replacing parts, and procedures for towing and transport.
Information on replacement parts, lubricants, and fuel specifications.
Overview of interchangeable equipment, approved attachments, and load chart importance.
Specifications for standardized side-shift carriages and forks.
Information on the fork protector attachment shield.
To Next Page
General